Manual.ly Logo

JBL Aquaristic ProFlora m2003 Kilavuz

0,0 · 0 Puanlar

PDF kılavuzu · 163 Sayfa

Türkçe

M: GO-GEM-FL-25
sayfa

/ 163

Loading...
d99b7fc22368adb896816115311ea8ac1a02 page 18
22
UK
Please ensure that only those pH values are set which do not harm sh. This is the section of
the table labelled “CO
2
correct“.
12.3 Setting the amount of CO
2
The amount of CO
2
which must be added for the desired pH value depends on various factors
such as water movement, consumption by plants, etc. and must be calculated individually for
each particular aquarium.
• Begin with about 15 bubbles per minute in the JBL Taifun per 100 l aquarium water (this
corresponds to about 10 bubbles per minute using the bubble counter).
• After one day, check whether the desired pH value has been attained in the aquarium.
• Should this not be the case, increase the CO
2
supply to about 20 – 25 bubbles in the JBL
Taifun (approx. 14 - 16 bubbles in the bubble counter). If necessary, increase the supply in
further small stages until the required pH level is reached.
• Check to make sure the pH level is maintained, so that the CO
2
level in the CO
2
permanent
test is also correct.
• In the case of the m503 and m2003 CO
2
kits, the pH computer automatically maintains the
selected pH level.
13 Note on the pressure indicated on the pressure regulator
The CO
2
gas in the CO
2
storage bottles is under high pressure. This pressure depends on the
ambient temperature. At room temperature (approx. 20°C), the left-hand pressure gauge of the
pressure regulator indicates a pressure of about 50 bar. This increases if the room temperature
rises. At 30 °C, the gauge therefore indicates about 70 bar. The pressure in the storage bottle
does not indicate the amount of gas it contains. It remains constant and in line with the sur-
rounding temperature until shortly before the bottle is empty. The amount of CO
2
in a bottle can
only be estimated by weighing. The empty weight (tare) of the storage bottle is stamped on the
bottle. The current weight minus the tare weight equals the amount of CO
2
.
The pressure in the bottle is adjusted downwards by the pressure regulator to an easily man-
ageable pressure, known as the “operating pressure “. The right-hand pressure gauge of the
pressure regulator indicates the operating pressure. In the JBL u001 and m001 pressure regu-
lators, it is preset to approx. 1.5 bar. This is the optimum pressure for CO
2
fertilization of aquari-
ums. If required, however, the operating pressure can also be adjusted using the setting screw,
which is situated under the small black cover at the “nose” of the regulator. When adjusting the
operating pressure, it is important for CO
2
to be released i.e. the adjusting screw should not be
closed, as this would prevent adjustment of the new operating pressure.
14 Changing bottles
If the bottle pressure (left-hand pressure gauge) falls below 30 bar, the bottle will need to be
relled (rellable bottle) within the next 2 – 3 days. The disposable bottle may only be replaced,
when it no longer contains any CO
2
. This is the case, when both pressure gauges indicate 0 and
no CO
2
bubbles rise in the aquarium.
Disposable storage bottles:
Make sure that the disposable bottle is completely empty. No CO
2
bubbles should rise in the
diffuser. Disconnect the CO
2
hose from the pressure regulator and unscrew the pressure regula-
tor from the bottle by turning anti-clockwise. Dispose of the empty bottle according to the local
regulations for waste disposal. Connect a new bottle as described in chapter 11.1.
Rellable storage bottles:
Close the bottle valve and disconnect the CO
2
hose from the pressure regulator. Open the
adjusting screw and release any pressure remaining in the pressure regulator until both pres-
sure gauges indicate 0. Disconnect the connecting nut of the pressure regulator from the bottle
valve. Have the rellable bottle relled.
If no full rellable storage bottles are available at the moment, a disposable bottle can be used.
Using an Allen key (size 6), remove the bottle connection nut from the pressure regulator. The

Yapay zeka ile JBL Aquaristic ProFlora m2003 kılavuzunuzla sohbet edin

JBL Aquaristic ProFlora m2003 kılavuzunuzdan yapay zeka ile anında yanıt alın

JBL Aquaristic ProFlora m2003 hakkında istediğinizi sorun. Yanıtlar bu kılavuzdan gelir ve dayandığı sayfalar belirtilir.

ProFlora m2003 Bakim Takvimi

Bakim zamani geldiginde bana hatirlat
Her 2-3 gün
Bırakma basıncını kontrol et ve doldur

Bırakma basıncı 30 bar'ın altına düşerse, kullanım çoklu bırakmayı sonraki 2 ila 3 gün içinde doldurun. Tek kullanımlık bırakmaları sadece boş olduğunda değiştirin.

Kilavuzda goster (24. sayfa)
Aylık
pH ve CO2 seviyelerini doğrula

Bir gün sonra istenen pH'a ulaşıldığını kontrol edin. Kalıcı bir test kullanarak pH bakımını ve CO2 seviyelerini periyodik olarak izleyin.

Kilavuzda goster (24. sayfa)
Her 100 litre sonra
Başlangıç CO2 dozajını ayarla

Akvaryum suyunun her 100 litresi için reaktörde dakikada yaklaşık 15 kabarcıkla başlat (sayacda yaklaşık 10 kabarcık).

Kilavuzda goster (24. sayfa)

Ucretsiz bakim hatirlatmalari

Satın alma tarihinize göre zamanlanır. Her zaman ücretsizdir, istediğiniz zaman abonelikten çıkabilirsiniz.

Göndererek gizlilik politikasını kabul etmiş olursunuz. Herhangi bir e-postada tek tıklamayla abonelikten çıkabilirsiniz.
M: QW-35-FL

Soru Sor Soru

0/1000

ProFlora m2003'i önerir misiniz?

Evet Hayır

Sıkça Sorulan Sorular

A

Bu, bitkili akvaryumlar için bir CO2 gübreleme sistemidir ve 1000 litreye kadar olan büyük tanklarda sağlıklı bitki büyümesini ve kararlı su koşullarını desteklemek için tasarlanmıştır.

Bu yanıt yardımcı oldu mu?

A

Yeni başlayanlar tarafından kullanılabilir, ancak basit bir CO2 kitine göre daha gelişmiştir. Otomatik pH kontrolü yardımcı olur, ancak kurulum, kalibrasyon ve güvenli kullanım yine de dikkat gerektirir.

Bu yanıt yardımcı oldu mu?

A

Hayır. Sistem pH sensörü olmadan satılır ve pH kontrol fonksiyonunun güvenilir çalışması için yeni bir JBL pH sensörü ayrıca satın alınmalıdır.

Bu yanıt yardımcı oldu mu?

A

Modüler reaktör, kullanıcının CO2 difüzyonunu akvaryum boyutuna göre uyarlamasına olanak tanır. m2003 için uzatılmış yapılandırma, çok büyük hacimleri verimli şekilde yönetmeye yardımcı olur.

Bu yanıt yardımcı oldu mu?

A

Yeniden doldurulabilir bir tüp, basınç yaklaşık 30 barın altına düştüğünde yeniden doldurulmalıdır. Tek kullanımlık tüp ise yalnızca tamamen boşaldığında ve hiç kabarcık kalmadığında değiştirilir.

Bu yanıt yardımcı oldu mu?

A

Kılavuz yaklaşık 15 ila 35 mg/l önerir; 20 ila 25 mg/l ideal kabul edilir. Kesin hedef, balık güvenliği için KH ve pH ile eşleştirilmelidir.

Bu yanıt yardımcı oldu mu?

M: GO-GEM-FL-25

Avantajlar ve Dezavantajlar

Avantajlar

  • 1000 litreye kadar kapsama alanıyla çok büyük akvaryumlar için tasarlanmıştır.
  • Modüler reaktör tasarımı, CO2 çıkışını tank boyutuna göre uyarlamaya yardımcı olur.
  • Otomatik pH kontrolü, CO2 dozajını daha az manuel işle kararlı hale getirebilir.
  • Kabarcık sayacı ve geri akış koruması güvenliği ve izlemeyi iyileştirir.
  • Yeniden doldurulabilir CO2 tüpü, daha kaynak dostu bir kurulum sağlar.
VS

Dezavantajlar

  • Kurulum, temel bir CO2 kitine göre daha karmaşıktır.
  • İlk kalibrasyon ve ayarlama zaman alabilir.
  • Yeniden doldurulabilir tüp sistemleri periyodik dolum ve dikkatli kullanım gerektirir.
  • pH sensörü dahil değildir ve ayrıca satın alınmalıdır.
M: GO-GEM-FL-25

Ürün Özellikler

Tip

CO2 gübreleme sistemi

M: GO-GEM-FL-25

Ürün Açıklama

JBL ProFlora m2003, 1000 l'ye kadar Kılavuz

JBL ProFlora m2003, büyük akvaryumlar için tasarlanmış üst düzey bir CO2 çözümüdür; bitkiler için dengeli beslenme ve balıklar ile bitkiler için daha sağlıklı bir denge sağlar. 1000 litreye kadar olan sistemler için üretilen bu ürün, güçlü 2 kg yeniden doldurulabilir CO2 tüpünü hassas basınç regülatörü, modüler Taifun reaktörü, kabarcık sayacı ve akıllı pH kontrol sistemiyle birleştirir. Pratikte bu, daha tutarlı CO2 iletimi, daha iyi bitki வளரışı ve su kimyasını daha kolay kontrol etme anlamına gelir.

JBL ProFlora m2003'ü öne çıkaran şey, hassasiyet ve kullanım kolaylığına odaklanmasıdır. Basınç regülatörü ince ayar için tasarlanmıştır, modüler reaktör ise akvaryum boyutuna uyacak şekilde genişletilebilir. Bu, CO2 ihtiyacının aydınlatma, bitki kütlesi ve su hareketine göre değiştiği bitkili tanklarda özellikle faydalıdır. Daha temiz bir kurulum isteyen akvaryum tutkunları için sistem, ayrı bir su pompasına ihtiyaç duymadan verimli pasif difüzyona dayanır.

Entegre pH kontrol dokunmatik ünitesi güvene bir katman daha ekler. pH ve sıcaklığı ölçer, ardından koşulları güvenli ve etkili bir aralıkta tutmak için CO2 çıkışını otomatik olarak ayarlar. Bu da sistemi özellikle aquascaping veya yüksek talepli bitkili akvaryumlar için cazip kılar; çünkü küçük değişiklikler bile büyük etki yaratabilir. Dahili geri akış korumasına sahip kabarcık sayacı da regülatör ve tüpü su girişine karşı korumaya yardımcı olur.

Bir diğer avantaj ise platformun esnekliğidir. Aynı aile içinde tek kullanımlık ve yeniden doldurulabilir tüp versiyonları, isteğe bağlı gece kapatma ve daha küçük sistemler için cam difüzör seçeneği bulunur. m2003 için daha büyük tüp ve genişletilmiş reaktör kapasitesi, zaman içinde güçlü ve güvenilir çıktı gerektiren ciddi bitkili tanklar için uygun olmasını sağlar. Sonuç, performans, güvenlik ve kaynak verimliliği arasında denge kuran rafine bir CO2 kurulumudur.

Notlar

  • Büyük bitkili akvaryumlar ve aquascaping için en uygunudur.
  • CO2 seviyeleri, balık güvenliği için KH ve pH ile eşleştirilmelidir.
  • Reaktörün en yüksek performansa ulaşmadan önce kısa bir alışma süresine ihtiyacı vardır.
  • Yeniden doldurulabilir tüp kullanımı her zaman güvenlik kurallarına uygun olmalıdır.
M: GO-GEM-FL-25

© Copyright 2026 Manual.ly